LDS67系列数控电动螺旋压砖机
?LDS67系列数控电动螺旋压砖机是针对耐火行业特点，为耐火行业量身研制的耐火材料成型专用设备，在充分研究国内外电动螺旋压力机的基础上，结合耐火行业的工艺特点，通过多次结构设计、改进和完善而成的辽锻第三代电动产品。 1.采用双电机驱动、新型结构，具有封闭高度大、工作台面宽、螺杆螺母受力状态好等多种优点。 具有控制先进、高效节能、运行安全、操作简便、成品质量稳定、维护工作量小等多种特点。 2.采用PLC可编程程序控制器对两台开关磁阻电机进行控制，并配有人机界面，可根据制造工艺和成型精度设置打击力。 3.适用于压制粘土砖、镁砖、镁碳砖、水口砖、刚玉砖、尖晶石砖、铝砖、焦油砖、滑板砖等多种耐火砖。
关键词：
所属分类：
LDS67系列电动螺旋压砖机
LDS67系列数控电动螺旋压砖机
辽锻，一直致力于提升电动螺旋压砖机的打击力和打击效率，2019年，通过充分的研究国内外的先进技术，并结合辽锻多年的电动螺旋产品的设计经验，研制出了LDS67系列数控电动螺旋压砖机，产品在设计过程中利用了三维建模、有限元分析、大数据采集、数字化模拟等先进的技术手段，优化了产品结构，提升了使用性能。广泛适用于生产粘土砖、镁砖、镁碳砖、水口砖、刚玉砖、尖晶石砖、铝砖、焦油砖、滑板砖等多种耐火砖，LDS67系列电动螺旋压砖机具有其他同类型产品无法比拟的优势：?
Liao Duan has been committed to improving the striking force and efficiency of electric screw presses. In 2019, through thorough research on advanced technologies at home and abroad, combined with Liao Duan’s years of experience in designing electric screw products, the LDS67 series was developed. The CNC electric screw press uses advanced technical means such as three-dimensional modeling, finite element analysis, big data acquisition, digital simulation, etc. in the product design process to optimize the product structure and improve the performance. Widely applicable to the production of clay bricks, magnesia bricks, magnesia carbon bricks, nozzle bricks, corundum bricks, spinel bricks, aluminum bricks, tar bricks, skateboard bricks and other refractory bricks. The LDS67 series CNC electric screw press has Unmatched advantages of other products of the same type:
•The equipment structure is simple and practical, the transmission mode is stable and reliable,
the operation and maintenance are convenient, the equipment runs smoothly, and the noise is low;
•Split pre-stressed fuselage structure with good rigidity and high strength;
•Using the classic sliding block guide structure, the sliding block has a large aspect ratio,
strong anti-eccentric load ability, accurate and reliable guidance;
•Strike force and high efficiency;
•Advanced lubrication technology, the screw, copper nut, and thrust bearing are all lubricated with
thin oil;
•Full closed loop control, product consistency is higher than the industry level.
上一页
无
下一页
相关产品
联系辽锻
地址：辽阳市太子河区干渠路83号
电话：0419-2125717 / 0419-2123628
传真：0419-2154600
邮箱：
yxb@liaoduan.onaliyun.com
网址：www.liaoduan.com
www.辽锻.商标
龙8-long8微信
公众号二维码
版权所有：龙8-long8
网站建设：中企动力沈阳 | SEO标签
客服热线
关注我们
公众号
关注公众号 获取更多灵感
- 返回顶部